Tank type non HEPA filter
Design features:
The 1 is mainly used for the suspended particles in the air filtration of 0.3um above, as the terminal filtration of filtration system.
The 2 filter is made of super fine glass fiber filter paper, the hot melt adhesive for separation.
3 this design reduces the cost of operation, no partition thermoplastic rubber across can ensure the same fold spacing, which guarantees the best flow through, high dust holding capacity, make full use of the entire depth filter filter.
The 4 filter surrounded by special sealant sealing, to ensure the sealing performance of the filter.
5 in the filter, air outlet surface with plastic mesh, in order to protect the filter paper is not damaged.
6 the filter outlet with a flange, the flange inner filling liquid sealant, sealing performance will be greatly enhanced.
The 7 tank sealant for non Newtonian liquids, the adhesive has not volatile oil, acid and alkali resistance, do not climb the advantages of non-toxic tasteless. And the flame retardancy and stable good electrical insulation performance.
8 because of the filter outlet with a flange, air inlet and outlet side inconsistent size, clients should provide, and the size of the wind into a custom.
9 each filter are subject to stringent testing.
10 filtering efficiency rating: H13-H14 (EN1822).
Performance characteristics:
1 high efficiency, low resistance, large dust holding capacity;
2 easy installation, good sealing performance.
Field of application:
Application of clean room terminal filter in various vertical ventilation.
Material components and operating conditions:
Ultra-fine glass fiber filter paper filter
The frame sealant PU two-component polyurethane ab
Frame material aluminum frame
Protective net spray diamond mesh
Separation of EVA hot melt adhesive
Sealant EVA, chloroprene rubber
Filtration efficiency of H13:99.97-99.99%@0.3 μ m H14:99.995-99.999%@0.3 μ
The use of the maximum temperature of 70 ℃
Using the highest humidity 80%
The relationship between flow rate and resistance:
Size and other parameters:
Size and shape
(W * H * D) mm inlet size
(W * H * D) mm rated
(m3/h) filter area
Dust holding capacity (M2)
Initial resistance (g)
(Pa) the end resistance
(Pa) the filtration efficiency
346 x 346 x 90 320*320*90 4004.16 = 250 ≤ 200 400-600 H13
More than 220 400-600 H14
510 x 510 x 90 484*484*90 9009.42 = 570 ≤ 200 400-600 H13
More than 220 400-600 H14
636 x 636 x 90 610*610*90 145014.9 = 900 ≤ 200 400-600 H13
More than 220 400-600 H14
941 x 636 x 90 915*610*90 215021.22 = 1330 ≤ 200 400-600 H13
More than 220 400-600 H14
1246 x 636 x 90 1220*610*90 285029.33 = 1760 ≤ 200 400-600 H13
More than 220 400-600 H14
* Note: in addition to the above size, can also according to the customer request non-standard custom-made.
Technical consultation: 18925063248

Related: tank type high efficiency filter tank type filter tank type filter without clapboard tank type high efficiency filter parameters of liquid sealed type high efficiency filter tank type high efficiency filter manufacturers tank type high efficiency filter type non HEPA filter tank - Guangzhou